| | General Description
Netsys NV-600 Series is a VDSL2 Modem leverages the extraordinary bandwidth
promise of VDSL2 ( max. 100Mbps Symmetric) technology, the next step in the
delivery of new high-speed Internet applications to end-users in their homes or
offices. Quick, easy and economical to install and maintain, the NV-600L works
with the NV-600R over existing copper wire infrastructure. NV-600L is a CO
( Central Office) device.
Netsys NV-600 Series will allow operators worldwide to compete with cable and
satellite operators by offering services such as HDTV, VOD, videoconferencing,
high speed Internet access and advanced voice services including VoIP, over a
standard copper telephone cable.
Netsys NV600 Series is seen by many operators as an ideal accompaniment to a
FTTP rollout, where for instance fiber is supplied direct to an apartment block and
from there copper cable is used to supply residents with high-speed VDSL2.
TOP
Key Features & Benefits
• Compliant with IEEE 802.3 & 802.3u Ethernet Standards
• Compliant with G993.2 VDSL2 standards
• Provides 4 x 10/ 100M auto-negotiation RJ-45 Ethernet ports
• Supports Bandwidth setup with 100 Mbps VDSL RJ-11 ports
• POTS / ISDN Splitter port RJ-11 x 1 ( Splitter on board)
• Supports auto speed for VDSL2 port
• Supports Web management( HTTP) , TFTP, Console( RS232)
• Supports uPnP/ PPPoE/ NAT/ DHCP/ DMZ/ Firewall
• Supports Route & Switch( Bridge) mode
• Supports Loop back
• Supports SNR indicator for check phone wiring quality
• Supports Interleave delay for Data Error & Noise Against
• Support 8a, 8b, 8c, 8d, 12a, 12b, 17a, 17b, 30a band profile
• Support 997, 998 band plan
• Provides surge protection for VDSL2 port
• EMI Compliant: CE, FCC, VCCI
TOP
Product Specifications
Standard: IEEE802.3 standard
IEEE802.3u standard
Compliant G993.2 VDSL2 standard
Interface: 4 * RJ-45 10/ 100Mbps Ethernet port
1 * RJ-11 connector for VDSL2
1 * RJ-11 connector for POTS/ ISDN device
Band Profile: 8a, 8b, 8c, 8d, 12a, 12b, 17a, 17b, 30a
Band Plan: 997, 998
Max. Bandwidth: Symmetric 100 Mbps / 0.3 Km
LED indication: Power LED
Link/ Active Status for Ethernet port * 4
Link LED for VDSL port
Switch method: Store and forward
Console port: RS-232C/ 115200bps
Flow control: Full duplex: IEEE 802.3x
Half duplex: Back pressure
Typical Power Consumption: 5.52W
Operating Temperature: 0° C ~ 50° C ( 32° F ~ 122° F)
Storage Temperature: -20° C ~ 65° C ( -4° F ~ 149° F)
Humidity: 10 to 90% ( non-condensing)
Dimensions: 184 x 146 x 40 mm ( 7.2" x 5.74" x 1.57" )
Chipsets: Infineon MIPS ADM5120P
Infineon VINAX | | |
|
)
